SuperDrive leaving the factory
SuperDrive in operation at quarry
SuperDrive in operation at quarry
SuperDrive in operation at quarry
SuperDrive in operation at quarry
SuperDrive in operation at quarry
SuperDrive in operation at quarry
Share This Information
- E-mail this page
SuperDrive for Hanson Pottal Pool quarry
23 November 2006, 140 words
Canning Conveyor has just completed a project for Hanson Aggregates at their Pottal Pool Quarry.
Canning supplied a new 90 m troughed belt ground conveyor which is designed to accept up to 600 tph of sand and gravel and is fed by an existing hopper/belt feeder.
A 37kw SuperDrive™ single drum was supplied which was fitted with a 630mm diameter motorized drive, partially ceramic lagged in combi red diamond including internal backstop. Also supplied was a high tension bend pulley, jib discharge drum, loop bend drum, primary belt scraper and a tungsten tipped secondary belt scraper.
The entire unit was built on a substantial skid mounted frame with a cantilevered jib discharge. A grading section and a heavy-duty tail end loading section and 30 standard Canning 2.6m field conveyor intermediate bays including 210m of 1000mm wide Cannoflex EP500/3 ply belting completed the project.